|
|
Post by Shadrock on Jan 11, 2014 12:56:51 GMT -6
Kicked around the house this morning and cooked some... I've never done a tenderloin, so I decided on a stuffed tenderloin with apples, craisens,celery,onions, and bread crums. Topped it with a herb rub that I mixed up...   Went ahead and threw on a chicken for sandwiches this week and a rack of ribs just incase I'm not feeling the tenderlion...  |
|
|
|
Post by emalaayyy on Jan 11, 2014 13:23:57 GMT -6
And what time is the party??
|
|
|
|
Post by BEN on Jan 11, 2014 13:33:20 GMT -6
um... wow....
|
|
|
|
Post by Weezul on Jan 11, 2014 13:43:10 GMT -6
You suck!
|
|
|
|
Post by Shadrock on Jan 11, 2014 14:20:56 GMT -6
Not too bad...   |
|
|
|
Post by Somebody on Jan 11, 2014 14:58:54 GMT -6
I'm locking this thread!  |
|
|
|
Post by emalaayyy on Jan 11, 2014 15:16:03 GMT -6
I may or may not have just tried to eat my phone...
|
|
|
|
Post by JustinL (McLovins) on Jan 11, 2014 15:33:32 GMT -6
Wow... Yeah you suck
|
|
|
|
Post by BEN on Jan 11, 2014 17:06:22 GMT -6
I may or may not have just tried to eat my phone... I'm really hungry now to. Idk.... Carpool to Tupelo?! |
|
|
|
Post by 06blackmax on Jan 11, 2014 19:09:52 GMT -6
I'm closer to him than y'all are!! So..... That means there won't be anything left by the time you get there.  |
|
|
|
Post by Shadrock on Jan 27, 2014 15:56:50 GMT -6
Now I got that trailer smoker out of the shop. I'd like to build one for the patio before I sell the trailer smoker. This go around, I'm going to do an insulated cabinet smoker. If done right, it should be able to run about 10 hrs on 4lbs of charcoal with very little monitoring... I'm going to attempt to clone the pitmaker safe. ( Pitmaker Safe) They have a pretty cool design that should be easy to replicate. Smoke enters the cooking chamber through the top of a false back wall and then exits the cooking chamber through two channels on the side that tee into a 4" exhaust pipe on top. It's wrapped with 2" of insulation... It's been about 10 years since I've done any modeling in Solidworks. Between the elapse of time and software updates, it was pretty much like I started over. It's slowly coming back to me...  |
|
|
|
Post by jphillips on Jan 27, 2014 22:01:10 GMT -6
Now I got that trailer smoker out of the shop. I'd like to build one for the patio before I sell the trailer smoker. This go around, I'm going to do an insulated cabinet smoker. If done right, it should be able to run about 10 hrs on 4lbs of charcoal with very little monitoring... I'm going to attempt to clone the pitmaker safe. ( Pitmaker Safe) They have a pretty cool design that should be easy to replicate. Smoke enters the cooking chamber through the top of a false back wall and then exits the cooking chamber through two channels on the side that tee into a 4" exhaust pipe on top. It's wrapped with 2" of insulation... It's been about 10 years since I've done any modeling in Solidworks. Between the elapse of time and software updates, it was pretty much like I started over. It's slowly coming back to me... I just started building 2 backwoods clones. |
|
|
|
Post by Shadrock on Jan 28, 2014 9:52:40 GMT -6
Those are pretty nice, I was debating between the Backwoods and Pitmaker. I've read nothing but good remarks on the backwoods design.
2 at one time, that sounds like work...
|
|
Just remember...we give them back in 10 months 
It's alive!! 
