|
Post by 06blackmax on Mar 11, 2014 6:06:43 GMT -6
Just be sure and not set a leaky cooler on that right side above the amp.
|
|
|
Post by BEN on Mar 11, 2014 6:51:55 GMT -6
Just be sure and not set a leaky cooler on that right side above the amp. I'm going to skin that side
|
|
|
Post by 06blackmax on Mar 11, 2014 17:32:21 GMT -6
Thought you might, just curious is all.
|
|
|
Post by BEN on Mar 11, 2014 18:00:19 GMT -6
Thought you might, just curious is all. I'm glad you said it... Cause if I hadn't already thought about it, it could've been bad lol
|
|
|
Post by BEN on Mar 15, 2014 16:54:13 GMT -6
Alright so. Thanks to Charlie for welding some stuff. The height of the rack is needed with the side cubby hole and with the action packer that's gotta go under it. If you look at the weatherstripping, you can see why I did this Also started back in with the trans today. Bellhousing bolts are in. TC is bolted up. Cross member is in. Might skip the first few hours of work Monday to finish it up.
|
|
|
Post by Somebody on Mar 15, 2014 17:56:52 GMT -6
Looks awesome... still needs paint tho..
|
|
|
Post by BEN on Mar 15, 2014 17:58:19 GMT -6
Hater. I don't have a garage. Lol
|
|
|
Post by BEN on Mar 18, 2014 18:21:36 GMT -6
And it moves on its own again!
|
|
|
Post by Somebody on Mar 18, 2014 19:18:16 GMT -6
And it moves on its own again! Woo hoo!!!! :-)
|
|
|
Post by mpdxtreme on Mar 18, 2014 21:26:49 GMT -6
And it moves on its own again! Congrats GG
|
|
|
Post by Chris on Mar 18, 2014 21:33:58 GMT -6
Rock on!
|
|
|
Post by BEN on Mar 19, 2014 8:29:24 GMT -6
And I have overdrive for the first time in a couple years.
|
|
|
Post by BEN on Mar 19, 2014 13:19:11 GMT -6
Drove it to work!
|
|
|
Post by 06blackmax on Mar 19, 2014 20:23:21 GMT -6
Oh, look...you almost made it up on the side walk!
|
|
|
Post by BEN on Mar 29, 2014 14:58:07 GMT -6
To catch this up to date. The A4LD is driving me nuts. After driving a couple hundred miles I lost lockup and overdrive again. Since then I've tried pulling codes, swapping sensors, switched valve bodies, checked wires, manually locked up solenoids, etc with no luck.
Also found my water leak and it's BADDDDD. So the interior is being ripped out shortly, gonna fix the cowl leaks, dry it out good, prime and paint the floor, them reinstall all the interior. This means I'll have to reprint my cowl also. It's peeling and rusting now.
It's always something.
|
|