|
|
Post by Somebody on Jan 13, 2014 11:37:23 GMT -6
BTW.. I've never needed to use the high side on mine.. as long as your radiator and pump is good you shouldn't need to..
|
|
|
|
Post by mike on Jan 13, 2014 12:48:48 GMT -6
this:  will hopefully fix this:  wired like this to use high and low:  just make sure whoever does it gets that last part right or you'll end up 60 miles from civilization overheated on a lone gravel road in Arkansas, don't be broke down on a deserted gravel road in Arkansas somewhere, wire it right the first time  |
|
|
|
Post by Shadrock on Jan 13, 2014 15:04:14 GMT -6
That's pretty good Mike...
Overheating problems plagued my old turbo mustang. I ran a Ron Davis radiator, Electric Mezierre water pump, two spal fans, and a custom aluminum fan shroud that was molded to the radiator. I had more in the damn cooling system than I had in the motor. I could cut the engine off between passes and turn the pump/fans on to cool off the engine.
|
|
|
|
Post by JustinL (McLovins) on Jan 14, 2014 14:06:05 GMT -6
 Well I have the 1st piece of the puzzle. Cost me a whopping $21.00 at pull a part. The good thing is when u manage Techs you can send them to run an errand for ya lol. Now just need to find the relays and waiting on the pump to come in. |
|
|
|
Post by Weezul on Jan 14, 2014 19:51:57 GMT -6
|
|
|
|
Post by Somebody on Jan 14, 2014 19:58:46 GMT -6
Yep.. Used one in mine for years.. just don't hit it with a high pressure washer when you clean underneath..  |
|
|
|
Post by JustinL (McLovins) on Jan 14, 2014 20:10:21 GMT -6
Yep.. Used one in mine for years.. just don't hit it with a high pressure washer when you clean underneath.. Cool. I will pick one up. Charlie when I get everything. Want to help me install it. Have to have some help due to my right arm. Its hell doing some things one armed. lol |
|
|
|
Post by mike on Jan 14, 2014 22:51:56 GMT -6
make sure you write down that part number when you go so they can find it. I'll help also if possible, depending on when.
|
|
|
|
Post by BEN on Jan 14, 2014 23:28:55 GMT -6
I'm game to help if I can... depends on when you do it. I gotta get mine done to.
|
|
|
|
Post by Somebody on Jan 15, 2014 7:04:38 GMT -6
Yep.. Used one in mine for years.. just don't hit it with a high pressure washer when you clean underneath.. Cool. I will pick one up. Charlie when I get everything. Want to help me install it. Have to have some help due to my right arm. Its hell doing some things one armed. lol Yep! I have most of the electrical stuff already.. |
|
|
|
Post by JustinL (McLovins) on Jan 15, 2014 7:24:02 GMT -6
Sweet. Thanks guys will let y'all know when I have everything.
|
|
|
|
Post by tjmichael on Jan 15, 2014 20:17:59 GMT -6
this: will hopefully fix this: wired like this to use high and low: Where did you get your fan ben? |
|
|
|
Post by tjmichael on Jan 15, 2014 20:18:39 GMT -6
And between what years Taurus does it need to fit?
|
|
|
|
Post by JustinL (McLovins) on Jan 15, 2014 20:46:36 GMT -6
93-95 Taurus 3.8
|
|
|
|
Post by Somebody on Jan 16, 2014 5:28:33 GMT -6
And between what years Taurus does it need to fit? 90-95 Mercury Sable or Lincoln Continental will work as well.. as long as it's the 3.8L |
|
Just remember...we give them back in 10 months 
Aug 15, 2015 10:21:43 GMT -6
Just remember...we give them back in 10 months 
Aug 15, 2015 10:21:43 GMT -6
It's alive!! 
