|
|
Post by Weezul on Feb 17, 2013 17:39:19 GMT -6
You planning to narrow the bumper any?
|
|
|
|
Post by jeffreylane on Feb 17, 2013 18:05:37 GMT -6
very nic e can't wait to see it back on the trails and in action again.. I should have it at the JSM/4wheel parts run. I plan to wheel it quite a bit this spring and summer. |
|
|
|
Post by jeffreylane on Feb 17, 2013 18:06:29 GMT -6
You planning to narrow the bumper any? yessir, and tie some tube into it.  |
|
|
|
Post by RESCUERODNEY on Feb 17, 2013 18:43:41 GMT -6
Looks great.
|
|
|
|
Post by Somebody on Feb 17, 2013 21:30:33 GMT -6
Great work man... Look forward to our next outing!!  |
|
Greg
Full Member
Posts: 330
|
Post by Greg on Feb 18, 2013 20:30:52 GMT -6
I like the headlights. been thinking about doing something similar to mine.
|
|
|
|
Post by jeffreylane on Feb 20, 2013 21:02:09 GMT -6
To complete the new setup on the rear suspension, I ordered some Rancho RS700MT monotube shocks with 14" stroke. These will be 4" more than the current shocks. I'm going to build a crossmember and run the shocks "through the floor" (if I had a floor back there). Off the top of my head, I'll be setting it up for about 5" up travel and the rest droop. I'll do a review on the shocks once I have them installed and run them on the trais.  |
|
|
|
Post by jeffreylane on Feb 22, 2013 17:01:04 GMT -6
cut down the front bumper. Just tacked in place right now, still need to burn it in good.  |
|
|
|
Post by Weezul on Feb 22, 2013 23:54:33 GMT -6
Looking nice. Can't wait to see the final bumper.
|
|
|
|
Post by TJNoe on Feb 23, 2013 16:07:09 GMT -6
 Lookin good! I can't wait to see it in person!
|
|
|
|
Post by jeffreylane on Feb 24, 2013 17:33:13 GMT -6
Started working on getting the rear shocks in place. Old vs New  |
|
|
|
Post by Weezul on Feb 25, 2013 7:08:01 GMT -6
Those new shocks are really long!!! Cut cut cut
|
|
|
|
Post by jeffreylane on Mar 29, 2013 17:07:36 GMT -6
Got some new brackets in  Also did a little tube work today. Didn't get as much done as I had hoped because of the rain, but at least got a start on it.  |
|
|
|
Post by MJL on Mar 29, 2013 17:29:51 GMT -6
|
|
|
|
Post by Somebody on Mar 29, 2013 20:30:56 GMT -6
OK.. so I'm guessing the brackets are for the rear?? And that tube is for an exo?? Looks sweet so far! |
|
Lookin good! I can't wait to see it in person! 
Just remember...we give them back in 10 months 
Aug 15, 2015 10:21:43 GMT -6
Just remember...we give them back in 10 months 
Aug 15, 2015 10:21:43 GMT -6
It's alive!! 
