|
dif cover
Jul 6, 2013 8:09:42 GMT -6
via mobile
Post by tjmichael on Jul 6, 2013 8:09:42 GMT -6
Ok fellas what kind of diff covers do yall recommend? Going on a dana 30 & 44
|
|
|
Post by Somebody on Jul 6, 2013 8:22:28 GMT -6
Ok fellas what kind of diff covers do yall recommend? Going on a dana 30 & 44 RC has a half cover that I used for years and always held up to abuse.. I run Ballistic now on the 44 and 14 bolt and they work great too.. and I like the skull on em.. ![;)](//storage.proboards.com/forum/images/smiley/wink.png)
|
|
|
Post by SW86 on Jul 6, 2013 9:25:45 GMT -6
I went with the BTF covers front and rear but looking back I should of went with my first choice. Riddlers.
Ill say this though, having one with a drain plug built in would be nice
|
|
|
Post by davidsyj on Jul 6, 2013 10:26:57 GMT -6
Ok fellas what kind of diff covers do yall recommend? Going on a dana 30 & 44 RC has a half cover that I used for years and always held up to abuse.. I run Ballistic now on the 44 and 14 bolt and they work great too.. and I like the skull on em.. ![;)](//storage.proboards.com/forum/images/smiley/wink.png) I am now using this (Charlie's old one) RC cover/guard on my front D30. It's holding up great and has been up against plenty o' rocks. My rear cover is a BTF kit that i welded together, saved about $40.00 but would purchase a pre-welded one next time. And it doesn't have a drain plug which I agree would be nice. Bobs won an OX cover for her front D30, looks nice and beefy but hasn't been installed yet. Waiting on her to get her lube locker before I install it.
|
|
|
Post by slinky on Jul 6, 2013 10:36:51 GMT -6
I've got the smittybuilt diff protectors on both of mine and they've taken all the abuse I've thrown at them.
|
|
|
Post by Weezul on Jul 6, 2013 11:01:18 GMT -6
I love my Riddlers. They've been hit a lot and only have a few scratches to show. I'd recommend them to anyone.
|
|
|
dif cover
Jul 6, 2013 12:16:55 GMT -6
via mobile
Post by Off_Road_Teacher on Jul 6, 2013 12:16:55 GMT -6
I have the g2 aluminium diff cover on my Dana30. It has held up pretty well and looks great
I got it off of amazon
|
|
|
Post by BEN on Jul 6, 2013 12:27:42 GMT -6
RuffStuff... expensive tho.
I like the guards over the stock ones, they hold up and look pretty cool. Solid Covers are decent to.
|
|
|
Post by RESCUERODNEY on Jul 6, 2013 13:09:11 GMT -6
I have a Spyder off road one on my D30 I got from Rotten Belly. I really like it. I have one Cylde is going to put his sypder on to match the front for my D44.
|
|
|
dif cover
Jul 6, 2013 13:14:24 GMT -6
via mobile
Post by grizzlyadams on Jul 6, 2013 13:14:24 GMT -6
RuffStuff... expensive tho. I like the guards over the stock ones, they hold up and look pretty cool. Solid Covers are decent to. This is what I use. Has worked fine for years and much cheaper than the whole cover.
|
|
|
Post by davidsyj on Jul 6, 2013 14:49:59 GMT -6
I have the g2 aluminium diff cover on my Dana30. It has held up pretty well and looks great I got it off of amazon Hey Teach, is this the one that calls for the offset TRE? Or that you had to get one for?
|
|
|
dif cover
Jul 6, 2013 17:55:17 GMT -6
via mobile
Post by Off_Road_Teacher on Jul 6, 2013 17:55:17 GMT -6
I have the g2 aluminium diff cover on my Dana30. It has held up pretty well and looks great I got it off of amazon Hey Teach, is this the one that calls for the offset TRE? Or that you had to get one for? Yeah I didn't need one I noticed my zj tie rod was backwards After flipping it, it cleared it with no issues
|
|
|
Post by davidsyj on Jul 6, 2013 20:05:59 GMT -6
Hey Teach, is this the one that calls for the offset TRE? Or that you had to get one for? Yeah I didn't need one I noticed my zj tie rod was backwards After flipping it, it cleared it with no issues Oh, ok. I didn't remember what it was but I remembered you had to do something with it. ![:thumbup1:](//storage.proboards.com/3613987/images/Pf3l87Bwpxax9yHk6S6v.gif)
|
|
|
Post by tjmichael on Jul 8, 2013 14:27:05 GMT -6
I picked up my g2 diff cover today and a lube locker from Jacob at four wheel parts today.
|
|
|
Post by JustinL (McLovins) on Jul 8, 2013 14:48:23 GMT -6
Im glad I could help u with that lol ![:punk:](//storage.proboards.com/3613987/images/3KZmHO3UZDby07SoKuid.gif)
|
|