|
|
Post by jeffreylane on Feb 19, 2013 18:28:28 GMT -6
Here's a pic of my new front end setup:  Looks great! |
|
Greg
Full Member
Posts: 330
|
Post by Greg on Feb 19, 2013 18:39:24 GMT -6
Here's a pic of my new front end setup: How much for the oxygen/propane torch setup in the background?  |
|
|
|
Post by davidsyj on Feb 19, 2013 20:42:17 GMT -6
I looked at mine.  |
|
|
|
Post by BEN on Feb 19, 2013 20:44:49 GMT -6
I looked at mine. I drove mine again tonight... it just feels right after DD'ing the explorer so long lol. I just need to find a small bumping in the front right and I'm gonna start DD'ing it again, fenders complete or not lol |
|
|
|
Post by mike on Feb 19, 2013 20:45:23 GMT -6
I looked at mine. Me too and I found some more clear coat coming off in new spot  |
|
|
|
Post by Somebody on Feb 19, 2013 22:53:40 GMT -6
Hoping to finish the tile in the bathroom so I can work on mine again before the run...  |
|
|
|
Post by mike on Feb 20, 2013 6:51:55 GMT -6
Hoping to finish the tile in the bathroom so I can work on mine again before the run... Your not finished with that yet ?? I can come over tonight and help you finish up if you need . |
|
|
|
Post by 06blackmax on Feb 20, 2013 6:54:28 GMT -6
Cut some more stuff off my frame. Getting ready to start on the bumpers and spring shackles for the new springs. Then move the axles out to the new position.
|
|
|
|
Post by Somebody on Feb 20, 2013 8:01:53 GMT -6
Hoping to finish the tile in the bathroom so I can work on mine again before the run... Your not finished with that yet ?? I can come over tonight and help you finish up if you need . Melissa is gonna do the painting, cleaning of the tile and sealing.. I can do the quarter round after all that's done.. No biggie.  |
|
|
|
Post by TJNoe on Feb 20, 2013 8:12:46 GMT -6
Last night, I removed the hi lift and mounts from my hood, topped off all the fluids, and greased everything that had a zerk fitting. Also tightened up one of my rear control arms that was so loose, I really have no clue how I didn't notice it when driving! All tightened up now though!
|
|
|
|
Post by TJNoe on Feb 20, 2013 8:15:31 GMT -6
Your not finished with that yet ?? I can come over tonight and help you finish up if you need . Melissa is gonna do the painting, cleaning of the tile and sealing.. I can do the quarter round after all that's done.. No biggie. Oohweee.....cutting and installing quarter round is sooooooo friggin fun! All those weird angles, and figuring out which way to turn the wood on the saw before you make the cut.....It's a lot easier if you have the original quarter round. |
|
|
|
Post by TJNoe on Feb 20, 2013 8:17:23 GMT -6
Here's a pic of my new front end setup: How much for the oxygen/propane torch setup in the background? I'm not sure how much "that" guy would sell it for......I'm thinkin it's not for sale....he still has a lotta work to do on his Jeep..... |
|
|
|
Post by Somebody on Feb 25, 2013 7:27:11 GMT -6
Jeremy... get a leaf spring u bolt and weld it upside down in the front hoop and you can hang you hook on it.. Works great for me and looks pretty good too.. |
|
|
|
Post by TJNoe on Feb 25, 2013 7:59:41 GMT -6
Jeremy... get a leaf spring u bolt and weld it upside down in the front hoop and you can hang you hook on it.. Works great for me and looks pretty good too.. Yessir, that is the plan....Sometime in the next couple of weeks, I'll be back over there to cut and weld up my homemade sliders, and that's definitely in the plans.  |
|
|
|
Post by Weezul on Feb 25, 2013 12:23:57 GMT -6
Jeremy... get a leaf spring u bolt and weld it upside down in the front hoop and you can hang you hook on it.. Works great for me and looks pretty good too.. I did this to mine. Definitely looks better! |
|
Just remember...we give them back in 10 months 
Aug 15, 2015 10:21:43 GMT -6
Just remember...we give them back in 10 months 
Aug 15, 2015 10:21:43 GMT -6
It's alive!! 
