|
|
Post by Somebody on Feb 15, 2013 22:40:35 GMT -6
Got my custom MML (thanks to Greg for the measurements) ann cut, drilled and installed only to find out I'm still going to need to buy a SYE and get my driveshaft lenghtened about 5"  I had a feeling that was gonna happen... but just think.. now it's easier to get to the top of the tranny!  |
|
|
|
Post by Somebody on Feb 15, 2013 23:00:33 GMT -6
installed the harnesses today... not quite sure how the brackets for the top need to be done.. I started by wrapping them like the instructions said...   |
|
|
|
Post by Somebody on Feb 15, 2013 23:01:41 GMT -6
But figured out that they tend to slide around to the side which sucks.. So after thinking of ways to get them to stay in one place I thought about doing this setup... Whatcha think?? Clyde said he has a better way and will show me tomorrow morning..  |
|
|
|
Post by Weezul on Feb 16, 2013 8:20:19 GMT -6
I like the wrap method better. Why not just make a tab to keep them from sliding?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 16, 2013 22:03:27 GMT -6
 New wheels (to me) and changed the fender flares. |
|
|
|
Post by Off_Road_Teacher on Feb 16, 2013 22:15:22 GMT -6
Looks great!!
|
|
|
|
Post by Somebody on Feb 16, 2013 22:22:16 GMT -6
I like the wrap method better. Why not just make a tab to keep them from sliding? I had Clyde make me a couple new brackets to mount them to the new bar across the back... Should take care of the sliding problem and be safe too... The reason I didn;t want to make a bracket to keep them from sling is cause I was afraid of them chaffing the edges of the belt... I'll post back up when I get the new mounts put in.. |
|
|
|
Post by Weezul on Feb 16, 2013 22:31:28 GMT -6
I like the wrap method better. Why not just make a tab to keep them from sliding? I had Clyde make me a couple new brackets to mount them to the new bar across the back... Should take care of the sliding problem and be safe too... The reason I didn;t want to make a bracket to keep them from sling is cause I was afraid of them chaffing the edges of the belt... I'll post back up when I get the new mounts put in.. There is a joke to be made about chaffing...but I'll just leave it to everyone's imagination.  |
|
|
|
Post by TJNoe on Feb 19, 2013 9:27:30 GMT -6
I installed a new to me bumper/radiator hoop/stinger to the front of Rusty....I LOVE it! Also had a good friend pick me up a rear locker, which will be installed next Tuesday! Hopefully, maybe, I'll be ablt to install the rock lights that have been sitting in my garage for over a week now. Bein one armed SUCKS monkey balls!!!!!
|
|
|
|
Post by TJNoe on Feb 19, 2013 9:29:00 GMT -6
Took my spare off for when I'm running around town and added 2 little brake lights in the holes in the tailgate.  It would kick SOOOOO much ass if you could somehow make that red Spyder on the back into your 3rd brake light.... |
|
|
|
Post by TJNoe on Feb 19, 2013 10:14:36 GMT -6
Here's a pic of my new front end setup:  |
|
|
|
Post by BEN on Feb 19, 2013 10:15:49 GMT -6
I drove mine last night... felt good
|
|
|
|
Post by grizzlyadams on Feb 19, 2013 10:27:27 GMT -6
Looks good man!
|
|
|
|
Post by PARKER on Feb 19, 2013 13:03:26 GMT -6
Put on a receiver hitch and slide hitch for a tow point and tried fixing the DAMN DW I have!!
|
|
|
|
Post by mike on Feb 19, 2013 18:16:11 GMT -6
I like the new front bumper Jeremy
|
|
Just remember...we give them back in 10 months 
Aug 15, 2015 10:21:43 GMT -6
Just remember...we give them back in 10 months 
Aug 15, 2015 10:21:43 GMT -6
It's alive!! 
