|
|
Post by davidsyj on Apr 8, 2016 16:14:01 GMT -6
Damn man, don't waste any time getting that thing protected!! One thing I've never done to either rig is underbelly skids. I probably should
|
|
Rottenbelly
Full Member
Posts: 315
Location: Cedar City, Utah
|
Post by Rottenbelly on Apr 8, 2016 19:11:57 GMT -6
Damn man, don't waste any time getting that thing protected!! One thing I've never done to either rig is underbelly skids. I probably should I found out real quick with other jeep you need skids out here. Heck I already dented the gas tank skid on this one!!
|
|
|
|
Post by c2 on Apr 10, 2016 18:59:02 GMT -6
Love those wheels!
|
|
|
Post by davidsyj on Apr 10, 2016 22:11:28 GMT -6
Leveling kit put on. Tomorrow is fender trimming and tire balancing so I can throw them on. Yeah that's making a huge difference in the looks! How much lift will you end up with?
|
|
Rottenbelly
Full Member
Posts: 315
Location: Cedar City, Utah
|
Post by Rottenbelly on Apr 11, 2016 6:00:54 GMT -6
Leveling kit put on. Tomorrow is fender trimming and tire balancing so I can throw them on. Yeah that's making a huge difference in the looks! How much lift will you end up with? I only plan on going with a 2.5 lift this time. I had a 4.5 lift on my last jeep and it took a lot to get it dialed in.
|
|
|
Post by Somebody on Apr 11, 2016 8:17:05 GMT -6
Yeah that's making a huge difference in the looks! How much lift will you end up with? I only plan on going with a 2.5 lift this time. I had a 4.5 lift on my last jeep and it took a lot to get it dialed in. I think 2.5" is all you need on a JKU.. especially out here where most trails are easily doable with 35's and lockers. Looks great man!
|
|
Rottenbelly
Full Member
Posts: 315
Location: Cedar City, Utah
|
Post by Rottenbelly on Apr 11, 2016 16:57:35 GMT -6
Fenders cut and tires are on. Adjusted speedo and disabled tpms with AEV procal. Tomorrow weather permitting I plan on installing a new exhaust and Bed lining the inner fenders. Still waiting on my side armor to get powdercoated. Still have some rake even though I did 2 inches in front and 1 in rear.
|
|
|
Post by 06blackmax on Apr 12, 2016 5:55:44 GMT -6
Man that looks good. I'm wanting a set of the rocker armor for mine. I put on the Rubi rails but I like the looks and function of the entire length of the rocker covered.
|
|
Rottenbelly
Full Member
Posts: 315
Location: Cedar City, Utah
|
Post by Rottenbelly on Apr 12, 2016 8:15:09 GMT -6
Man that looks good. I'm wanting a set of the rocker armor for mine. I put on the Rubi rails but I like the looks and function of the entire length of the rocker covered. The Rubi rails with the armor behind them hold up pretty good, had them on my old jeep.
|
|
Rottenbelly
Full Member
Posts: 315
Location: Cedar City, Utah
|
Post by Rottenbelly on Apr 12, 2016 11:50:56 GMT -6
Flowmaster HP 2 high clearance exhaust installed. Nice tone on the 3.6, not too ricey! Goes up over the swaybar and tucks up nice under the bumper.
|
|
Rottenbelly
Full Member
Posts: 315
Location: Cedar City, Utah
|
Post by Rottenbelly on Apr 13, 2016 6:28:29 GMT -6
|
|
|
Post by Somebody on Apr 13, 2016 8:43:46 GMT -6
Aren't the malls out here awesome??
|
|
|
Post by SW86 on Apr 13, 2016 21:40:57 GMT -6
Man I'm telling you that shade of blue is fucking sweet.. Paint your jeep now or never post a picture again!
|
|