|
Post by Off_Road_Teacher on Jun 7, 2015 11:23:18 GMT -6
Well I am wanting to change out the driver side Hub assembly but I know I have nothing to break that axle nut loose. The last time I did it I borrowed someone's electric impact and went pretty easily.
Anyone nearby have an impact? Or is anyone free and feel like chatting while watching me tear something up.
|
|
|
Post by SW86 on Jun 7, 2015 12:20:42 GMT -6
Just use a half inch ratchet you don't mind possibly breaking and a piece of pipe for a breaker bar. Done... Possibly I'm no where near you or id come help. It can be done in 15 minutes with the right tools or know-how
|
|
|
Post by davidsyj on Jun 7, 2015 15:14:17 GMT -6
or you could just swap out the axle/hub assy with one from PAP?
|
|
|
Post by James on Jun 7, 2015 17:15:12 GMT -6
You can still borrow it, but you've gotta drive to Coldwater to use it now.
|
|
|
Post by BEN on Jun 7, 2015 17:53:25 GMT -6
I have an air impact...? I need a battery impact...
|
|
|
Post by Off_Road_Teacher on Jun 7, 2015 19:25:41 GMT -6
You can still borrow it, but you've gotta drive to Coldwater to use it now. I thought it was your impact but wasn't sure lol
|
|
|
Post by BEN on Jun 7, 2015 19:47:46 GMT -6
When are you doing it?
|
|
|
Post by Off_Road_Teacher on Jun 7, 2015 21:25:29 GMT -6
Sometime this week I have to go to Oxford to meet with a few schools bout a new job. I'll let you know for sure though
|
|
|
Post by Off_Road_Teacher on Jun 8, 2015 17:31:37 GMT -6
Ok not moving to Oxford At least not right now
Anyways is anyone free Tomo or now that would help me by figuring out this issue
Symptoms I'm experiencing Loud consistent noise only in front after you get over 15mph Like s grinding noise when coming to a stop - like under 5mph to 0
|
|
|
Post by mike on Jun 8, 2015 17:37:08 GMT -6
Have you checked the brakes ?
|
|
|
Post by SW86 on Jun 8, 2015 17:39:48 GMT -6
Jack up the tire and see if you can wiggle it side to side
|
|
|
Post by Off_Road_Teacher on Jun 8, 2015 18:44:30 GMT -6
Have you checked the brakes ? It does this rolling and it's not a brake grinding sound either. It sounds horrible Yeah couldn't tell if there was any play
|
|
|
Post by Somebody on Jun 8, 2015 21:06:03 GMT -6
Jack the front up.. put blocks behind rear wheels so it doesn't roll.. Take rear driveshaft out.. put into 4 hi and run it.. see where the noise is coming from..
|
|