|
Post by Off_Road_Teacher on May 19, 2015 10:50:36 GMT -6
Does anyone have a electric impact or something I can use to change out my hub assemblies?
|
|
|
Post by c2 on May 19, 2015 10:58:02 GMT -6
I think you need to invest in dome tools before you start modding this thing! I have one but I'm a little out of the way
|
|
|
Post by Off_Road_Teacher on May 19, 2015 12:48:19 GMT -6
I think you need to invest in dome tools before you start modding this thing! I have one but I'm a little out of the way Lol yeah I think I do I used to have a electric impact however I let my brother use it and it was never returned
|
|
|
Post by mike on May 19, 2015 15:11:12 GMT -6
I have one that plugs into a ciggerette lighter. Not sure if it will do what you want tho.
|
|
|
Post by Off_Road_Teacher on May 19, 2015 15:52:08 GMT -6
I have one that plugs into a ciggerette lighter. Not sure if it will do what you want tho. No I don't think so I think we have a store use impact at autozone I just need it to break loose the axle nut and to put it back on
|
|
|
Post by mike on May 19, 2015 16:45:39 GMT -6
A breaker bar and your jack handle should break that loose.
|
|
|
Post by Weezul on May 24, 2015 14:09:48 GMT -6
A breaker bar and your jack handle should break that loose. And it needs to be torqued back on. 175 ft-lbs Here is a good write-up on it. www.jedi.com/obiwan/jeep/hub/
|
|