|
|
Post by jeffreylane on May 10, 2015 17:33:20 GMT -6
|
|
|
|
Post by jeffreylane on May 10, 2015 17:36:43 GMT -6
Here the axles are at 107". The front will still need to come up about 3" to get the belly clearence right.  |
|
|
|
Post by c2 on May 10, 2015 18:01:46 GMT -6
You sir are awesome!
I'm assuming your going to have to change the cage up some since your adding a rear seat??
|
|
|
|
Post by jeffreylane on May 10, 2015 18:51:53 GMT -6
You sir are awesome! I'm assuming your going to have to change the cage up some since your adding a rear seat?? Once I get the suspension done and the engine up and running again, I'll be changing it up to be a 3 seater and working on cosmetics. The rear quarter panels of the tub are in rough shape. They have rusted in spots, then bondoed over, then layed on its side a few times, then bondoed again, then beat on again. I'll be cutting alot out and replacing with 1/8" sheet metal. not trying to build a show jeep, just want to start fresh and earn my own dents. |
|
|
|
Post by 06blackmax on May 10, 2015 19:45:06 GMT -6
What are you looking at for ride height and flex?
|
|
|
|
Post by jeffreylane on May 10, 2015 19:59:24 GMT -6
What are you looking at for ride height and flex? was aiming for 107"wheelbase, but I think it's going to land at at probably 108 -108.5" to keep from having to redo alot of the chassis. belly height I'm looking at 18". Coilovers are 16", and going to start out with around 8" up and 8" down, but will adjust according to how the "real world" makes me. Went with 200/250 spring rate in the front and 160/200 in the rear. |
|
|
|
Post by jeffreylane on May 14, 2015 12:13:15 GMT -6
Finished up building the new transmission crossmember  |
|
|
|
Post by Weezul on May 14, 2015 12:18:10 GMT -6
Looks nice!
|
|
|
|
Post by jeffreylane on May 14, 2015 12:50:22 GMT -6
|
|
|
|
Post by c2 on May 14, 2015 12:58:34 GMT -6
As much progress as you made last weekend, I figured you'd be out wheeling it by now!  |
|
|
|
Post by jeffreylane on May 14, 2015 13:47:03 GMT -6
As much progress as you made last weekend, I figured you'd be out wheeling it by now! I wish |
|
|
|
Post by 06blackmax on May 14, 2015 16:32:31 GMT -6
Jeff's got skilz!!! Looks good! I need a traction bar and swing shackle in your spare time. |
|
|
|
Post by ODG010III0 on May 14, 2015 17:08:33 GMT -6
Looks good man!!
|
|
|
|
Post by Weezul on May 14, 2015 18:12:43 GMT -6
As much progress as you made last weekend, I figured you'd be out wheeling it by now! We need to build my crossmember. I'm tired of moving the parts around. Haha |
|
|
|
Post by c2 on May 14, 2015 19:00:28 GMT -6
As much progress as you made last weekend, I figured you'd be out wheeling it by now! We need to build my crossmember. I'm tired of moving the parts around. Haha yup |
|
Just remember...we give them back in 10 months 
Aug 15, 2015 10:21:43 GMT -6
Just remember...we give them back in 10 months 
Aug 15, 2015 10:21:43 GMT -6
It's alive!! 
