Post by slinky on Feb 27, 2013 11:07:19 GMT -6
This is how you get it from Clyde (SOR)
First thing you do is line the sliders up where you want them to go and mark your holes for drilling
next you fit the small bracket piece where it needs to be then mark holes for drilling
Now you'll want to bolt everything where it goes and tack the small bracket in place with a welder, after this is done you'll need to cut the angles on your tubes to make them sit flush to the plate and then remove the slider for welding.
After you're done welding everything in place you need to let it cool and prep for primer and paint.
When the paint has dried reinstal the slider onto your rig and enjoy..
First thing you do is line the sliders up where you want them to go and mark your holes for drilling
next you fit the small bracket piece where it needs to be then mark holes for drilling
Now you'll want to bolt everything where it goes and tack the small bracket in place with a welder, after this is done you'll need to cut the angles on your tubes to make them sit flush to the plate and then remove the slider for welding.
After you're done welding everything in place you need to let it cool and prep for primer and paint.
When the paint has dried reinstal the slider onto your rig and enjoy..
Just remember...we give them back in 10 months 
It's alive!! 
