Rook
New Member
Under my jeep
Posts: 38 
|
Post by Rook on Feb 9, 2015 12:01:16 GMT -6
I don't want to have to rush. I would like to rebuild one a little differently. I would like to to find a bare or factory axle. If someone knows someone who has one or where to find one please let me know. 662891676 text
|
|
|
|
Post by davidsyj on Feb 9, 2015 13:06:23 GMT -6
$100.00 at Pull A Part.
|
|
|
|
Post by SW86 on Feb 9, 2015 14:30:51 GMT -6
80 if its completely bare at pull a part. Unless someone has one laying around, that's your best bet..
|
|
|
|
Post by jeffreylane on Feb 9, 2015 15:07:26 GMT -6
$100? I just went with a buddy to get an 8.8 there and it was around $165 with brakes for the rear axle with tax and core.
|
|
|
|
Post by mike on Feb 9, 2015 15:10:44 GMT -6
Yea Pull-A-Part has gone up on their prices
|
|
|
|
Post by Weezul on Feb 9, 2015 15:24:36 GMT -6
Mine was a little over $100 at PAP. We pulled the shafts as they were trash.
|
|
|
|
Post by davidsyj on Feb 9, 2015 15:34:38 GMT -6
$100? I just went with a buddy to get an 8.8 there and it was around $165 with brakes for the rear axle with tax and core. With the entire axle yeah, that's what you'll pay. For a stripped down unit it's much less. I think I paid $80.00 for mine with the pinion gear and e-brake assy's still on it |
|
|
|
Post by jeffreylane on Feb 9, 2015 15:35:22 GMT -6
Gotcha
|
|
Rook
New Member
Under my jeep
Posts: 38
|
Post by Rook on Feb 9, 2015 19:19:52 GMT -6
Yeah just need the housing. But it's hard to no if there is one there 2 hours away. Anyone want to go pull one and let me pay them for pulling it? If it has 3.55 gears I'll take everything and if it's easier I'll take the whole thing.
|
|
|
|
Post by mike on Feb 9, 2015 19:49:49 GMT -6
I'll probably be able to go look this weekend for ya
|
|
|
|
Post by mike on Feb 9, 2015 19:50:23 GMT -6
What all would they have put them in ?
|
|
|
|
Post by Weezul on Feb 9, 2015 20:05:58 GMT -6
What all would they have put them in ? Cherokees. Biggest thing is to make sure the passenger axle tube is solid and not the disconnect version. |
|
|
|
Post by mike on Feb 9, 2015 22:22:41 GMT -6
What all would they have put them in ? Cherokees. Biggest thing is to make sure the passenger axle tube is solid and not the disconnect version. If that's all he could find he can weld up that hole and swap to a solid axle |
|
|
|
Post by davidsyj on Feb 10, 2015 2:45:37 GMT -6
Yeah just need the housing. But it's hard to no if there is one there 2 hours away. Anyone want to go pull one and let me pay them for pulling it? If it has 3.55 gears I'll take everything and if it's easier I'll take the whole thing. If one is found you can pick it up on the 28th  |
|
|
|
Post by mike on Feb 14, 2015 17:05:25 GMT -6
Found   |
|
Just remember...we give them back in 10 months 
It's alive!! 
