tpfarm1
New Member
Posts: 3 
Location: Olive branch
|
Post by tpfarm1 on May 11, 2014 19:04:11 GMT -6
Hey guys riding around on our farm today in my xj went down a four wheeler trail, got to a hill and needed 4wd to go up, tried locking it in repeatedly but front wheels wouldn't pull but when in low range u can defiantly tell it was in low. After getting up the hill to flat land I climb under to see what's going on and notice a 4 wire round plug with two wires cut would anyone happen to know if this could cause the front wheels not pulling. Thanks for your help.
|
|
|
|
Post by Off_Road_Teacher on May 11, 2014 20:02:58 GMT -6
Anyway you could get pictures
|
|
|
|
Post by BEN on May 11, 2014 20:19:09 GMT -6
Is it electric tcase? I don't see why wires would matter to an XJ case.
What wires plug in the case in a XJ?
|
|
|
|
Post by Off_Road_Teacher on May 11, 2014 20:29:41 GMT -6
Is it electric tcase? I don't see why wires would matter to an XJ case. What wires plug in the case in a XJ? Solenoid?? Look at the linkage and adjust if need to When was last time it worked |
|
|
|
Post by Somebody on May 11, 2014 21:20:00 GMT -6
The case is mechanical.. no reason why any wires being cut would keep it from working..
Did the 89 model have the front vacuum disconnect on the D30? if so that's where I would look
|
|
|
|
Post by BEN on May 11, 2014 21:23:03 GMT -6
Check front driveshaft for movement?
|
|
|
|
Post by 06blackmax on May 11, 2014 22:11:00 GMT -6
Wires are prolly for the dash light. Was it on when trying 4wd ?
|
|
|
|
Post by Off_Road_Teacher on May 11, 2014 22:22:32 GMT -6
My dash lights have never came on when using 4wd
|
|
Just remember...we give them back in 10 months 
It's alive!! 
