|
|
Evap Lines
Apr 14, 2014 18:52:38 GMT -6
via mobile
Post by Off_Road_Teacher on Apr 14, 2014 18:52:38 GMT -6
When we did my 8.8 we cut my exhaust. After driving around it has melted My evap lines. I drove from hot springs to Memphis with it melted and check engine light on. Yesterday I cut the lines and ran gas hose over it, I reset the computer and it came back on.
What will that affect my everyday driving ? I thought bout removing the bulb
|
|
|
|
Post by Somebody on Apr 14, 2014 18:58:02 GMT -6
It deals with emissions.. Prolly won't hurt anything except gas mileage maybe..
|
|
|
|
Evap Lines
Apr 14, 2014 19:01:17 GMT -6
via mobile
Post by Off_Road_Teacher on Apr 14, 2014 19:01:17 GMT -6
I' plan on messing with the lines and put clamps on the hoses.
|
|
|
|
Post by JustinL (McLovins) on Apr 14, 2014 19:05:27 GMT -6
You always messing stuff up.
Get it fixed and just leave it alone ha
|
|
|
|
Evap Lines
Apr 14, 2014 19:39:37 GMT -6
via mobile
Post by mike on Apr 14, 2014 19:39:37 GMT -6
I had an evap canister i posted up last week but its all gone to the scrap yard now
|
|
|
|
Post by Weezul on Apr 14, 2014 20:14:01 GMT -6
Another reason I'm thankful my evap stuff is under the hood.
|
|
|
|
Evap Lines
Apr 14, 2014 20:40:18 GMT -6
via mobile
Post by Off_Road_Teacher on Apr 14, 2014 20:40:18 GMT -6
Another reason I'm thankful my evap stuff is under the hood. Yeah a horrible design but oh well |
|
Greg
Full Member
Posts: 330
|
Evap Lines
Apr 14, 2014 20:50:17 GMT -6
via mobile
Post by Greg on Apr 14, 2014 20:50:17 GMT -6
Another reason I'm thankful my evap stuff is under the hood. Mine was all under the hood but I removed it and still don't have a light on. |
|
|
|
Evap Lines
Apr 14, 2014 21:22:58 GMT -6
via mobile
Post by Off_Road_Teacher on Apr 14, 2014 21:22:58 GMT -6
Another reason I'm thankful my evap stuff is under the hood. Mine was all under the hood but I removed it and still don't have a light on. I thought there'd be a fuse for it but I gave up I do need to find someone who has a 02-06 tj Just to make sure I connected them correctly. |
|
|
|
Post by Somebody on Apr 14, 2014 21:23:54 GMT -6
Mine was all under the hood but I removed it and still don't have a light on. I thought there'd be a fuse for it but I gave up I do need to find someone who has a 02-06 tj Just to make sure I connected them correctly. 03-06 02's were under the hood.. |
|
|
|
Evap Lines
Apr 14, 2014 23:37:02 GMT -6
via mobile
Post by Off_Road_Teacher on Apr 14, 2014 23:37:02 GMT -6
I thought there'd be a fuse for it but I gave up I do need to find someone who has a 02-06 tj Just to make sure I connected them correctly. 03-06 02's were under the hood.. Thanks |
|
|
|
Post by PARKER on Apr 15, 2014 7:31:36 GMT -6
03-06 02's were under the hood.. Thanks Now you can put that front driveshaft back in, with that info...huh?  |
|
|
|
Post by Somebody on Apr 15, 2014 9:31:49 GMT -6
Do you not have a muffler teach?
If so get a turn down and put it on the end of the exhaust pipe..
|
|
|
|
Post by Off_Road_Teacher on Apr 15, 2014 9:58:11 GMT -6
Do you not have a muffler teach? If so get a turn down and put it on the end of the exhaust pipe.. Yeah I have a muffler The exhaust was cut off right before the track bar So it's blowing towards those lines |
|
|
|
Evap Lines
Apr 15, 2014 10:04:16 GMT -6
via mobile
Post by Weezul on Apr 15, 2014 10:04:16 GMT -6
If it melted those I'd check your tank too. It is not far from them and also plastic.
|
|
Just remember...we give them back in 10 months 
It's alive!! 
