|
Post by arkansasammy on Feb 11, 2013 16:21:33 GMT -6
i have had this samurai for several years and slowly building it. I will try pull together all my pictures. This is how it sits right now. 1988 samurai, 87 ifs rear axle, 85 front axle, 4.10 gears open front and rear, rock crawler wheels with 2.5 backspacing, 35 inch mtrs, SPOA axle lift with Toy rear springs with offset. front frame stretch of 6-7 inches, TG high steer with IFS steering box and pump. Future plans: 5.29 gears, 6.5 t-case gears, detroit rear.
![](http://i1258.photobucket.com/albums/ii522/arkanasammy/221b7f88-0939-47d2-b109-a2d0e23c7f49_zps64df0a10.jpg)
|
|
|
Post by Chris on Feb 11, 2013 16:44:43 GMT -6
Very cool, I've always been a fan of the Sammy's!
|
|
|
Post by mike on Feb 11, 2013 18:50:12 GMT -6
Nice !! Looking forward to seeing more of it
|
|
santa
Junior Member
![*](//storage.proboards.com/3613987/images/ATrWwMBzUcfwTBxWU9Lx.jpg)
Enter your message here...
Posts: 78
|
88 samurai
Feb 11, 2013 19:19:45 GMT -6
via mobile
Post by santa on Feb 11, 2013 19:19:45 GMT -6
What engine? Stock 1.3, 1.6 tracker or something bigger? I have had a couple of trackers built and sold.
|
|
|
Post by slinky on Feb 12, 2013 8:01:09 GMT -6
I've got a Sammy tcase sitting in my garagethat I'm no longer going to use not to mention a good deal on some FJ-40 axles with 4.10 gears already in them...... ![:popcorn:](//storage.proboards.com/3613987/images/2pg0UXsRyB3h_HQmBF5M.gif)
|
|
|
Post by arkansasammy on Feb 12, 2013 8:04:24 GMT -6
slinky,
what gear ratio is in the t-case?
|
|
|
Post by slinky on Feb 12, 2013 8:07:20 GMT -6
not sure I pulled it out of a Sammy and it was so clean you could eat off it... ![:punk:](//storage.proboards.com/3613987/images/3KZmHO3UZDby07SoKuid.gif)
|
|
|
Post by slinky on Feb 12, 2013 8:08:09 GMT -6
I'll check tonight when I get home
|
|
|
Post by arkansasammy on Feb 13, 2013 8:06:09 GMT -6
i am running stock 1.3 engine...for now. I will eventually do a 1.6 swap after it dies.
|
|
santa
Junior Member
![*](//storage.proboards.com/3613987/images/ATrWwMBzUcfwTBxWU9Lx.jpg)
Enter your message here...
Posts: 78
|
Post by santa on Feb 13, 2013 8:58:12 GMT -6
They make 2 different 1.6 motirs the 24 valve has a few more horses though.
|
|