|
Post by N2DEEP on Aug 29, 2013 11:13:09 GMT -6
If you only have to unbolt the rear u joint to pull the shaft, it does not have a slip yoke eliminator.
|
|
|
Post by Chris on Aug 29, 2013 13:01:47 GMT -6
I twisted my rear drive shaft in half on my xj years ago and drove it a few miles down the street in 4hi with a front locker. Be SUPER careful if you do this especially at speeds over 50...it was very squirley and I had but prints in the seats from holding on from thinking I was gonna roll it. The locker was kicking in and out was my problem...I had an Aussie.
|
|
|
Post by Cottonmouth on Aug 29, 2013 13:28:22 GMT -6
I twisted my rear drive shaft in half on my xj years ago and drove it a few miles down the street in 4hi with a front locker. Be SUPER careful if you do this especially at speeds over 50...it was very squirley and I had but prints in the seats from holding on from thinking I was gonna roll it. The locker was kicking in and out was my problem...I had an Aussie. thanks for the heads up
|
|
|
Post by Cottonmouth on Aug 29, 2013 13:29:32 GMT -6
If you only have to unbolt the rear u joint to pull the shaft, it does not have a slip yoke eliminator. DEEP, your right, no slip limnater
|
|
|
Post by Off_Road_Teacher on Aug 29, 2013 14:12:01 GMT -6
How long have you had the lift on? How long has this been going on?
|
|
|
Post by Cottonmouth on Aug 29, 2013 14:36:43 GMT -6
How long have you had the lift on? How long has this been going on? I bought it like that so I dont know. It did it on the way home from where I bought it. At that time it had 33 nitto mud grapplers and I thought it may just vibrate from the bigger wider tires, but it does it just as bad w the stock 31's on it.
|
|
|
Post by Off_Road_Teacher on Aug 29, 2013 15:30:36 GMT -6
How long have you had the lift on? How long has this been going on? I bought it like that so I dont know. It did it on the way home from where I bought it. At that time it had 33 nitto mud grapplers and I thought it may just vibrate from the bigger wider tires, but it does it just as bad w the stock 31's on it. It needs a transfer case drop Im sure
|
|
|
Post by Somebody on Aug 29, 2013 15:46:29 GMT -6
With the 44 rear and a 4" lift it's more than likely gonna need the Tcase drop and/or MML...
|
|
|
Post by Cottonmouth on Aug 29, 2013 16:32:26 GMT -6
ok I believe yall are right on the T-case drop. I dont know what a MML is.
I took the rear drive shaft out.....smoooooth, like it should ride, U-joints are smooth too, got to be a bad angle.
Teach, you said you had a t-case drop. How much is that gonna set me back? And I guess I need to get someone to install.....
|
|
|
Post by Off_Road_Teacher on Aug 29, 2013 16:44:48 GMT -6
ok I believe yall are right on the T-case drop. I dont know what a MML is. I took the rear drive shaft out.....smoooooth, like it should ride, U-joints are smooth too, got to be a bad angle. Teach, you said you had a t-case drop. How much is that gonna set me back? And I guess I need to get someone to install..... Pretty easy to do transfer case drop Id trade it for a vanilla coke lol
|
|
|
Post by Cottonmouth on Aug 29, 2013 16:53:44 GMT -6
Just tell me when and where
|
|
|
Post by mike on Aug 29, 2013 17:12:30 GMT -6
Ill help you put it on this weekend if you want some help. Its stupid easy so it wont take long. Call or text if you want sime help 901 483 8322
|
|
|
Post by Somebody on Aug 29, 2013 17:19:12 GMT -6
ok I believe yall are right on the T-case drop. I dont know what a MML is. I took the rear drive shaft out.....smoooooth, like it should ride, U-joints are smooth too, got to be a bad angle. Teach, you said you had a t-case drop. How much is that gonna set me back? And I guess I need to get someone to install..... MML is a motor mount lift.. It helps with the angles when you don't have a Slip Yoke Eliminator on.. I would do the Tcase drop first and then go from there.. easier and cheaper than a MML..
|
|
|
Post by RESCUERODNEY on Aug 29, 2013 17:23:30 GMT -6
You all are awsome!! That is why I like this club.
|
|
|
Post by JustinL (McLovins) on Aug 29, 2013 17:44:31 GMT -6
Cottonmouth just like I tiold you on the phone earlier. The club will bend over backwards for each other and people in here will give you the shirt off there backs. That's why I support and tell everyone about this club. Sound like a vanilla coke for a trans drop is a good deal. You might want to jump on that. lol
|
|