jamison
Junior Member
Posts: 157 
Location: Bartlett
|
Post by jamison on Aug 26, 2013 15:57:02 GMT -6
Like it says, I need a piece of 6x6" angle, 7" long, prefer 1/4" thick, if possible.
Can deal with 6x5", but must be 6" on one side.
Please let me know what you have and how much...
|
|
|
|
Post by mike on Aug 26, 2013 19:06:11 GMT -6
I might have something that will work for you, your welcome to stop by and take a look. Just to be sure , you need it 7 inches not 7 foot right ?
|
|
jamison
Junior Member
Posts: 157
Location: Bartlett
|
Post by jamison on Aug 26, 2013 21:19:11 GMT -6
Yes, 7 inches. I going to Clyde's Wednesday to finish my track bar mounts, and he can make it if I don't find a piece of scrap. I need it to plate the unibody rail where the trackbar frame mount is going. I plan to bolt it to the stock holes and then stitch weld the edges before I weld the new mount to the angle. That should be plenty strong vs. just butt welding the new mount directly to the unibody rail.
|
|
Just remember...we give them back in 10 months 
It's alive!! 
