|
|
Post by Somebody on Nov 12, 2013 11:20:56 GMT -6
The front is skinned.. Ready for an awesome paint job by Chris..  Not bad for a rattle canned job..
The tank that I have will hold 40 gallons.. but it's a horizontal tank.. which means it has to be filled vertically and used horizontally.. Can one of you gurus tell me what the port is on the left and how to fill it?
The grill is gonna work just fine with the sliding in and out.. Just have to order 2 more slides and we need about 8ft of 4" angle iron if anyone has any laying around..
Gonna mount the tank in front of the grill.. 68lbs filled will tow better in the middle than on the tongue.. Plus it's less routing of line to the grill..
|
|
|
|
Post by Somebody on Nov 12, 2013 11:22:28 GMT -6
Folks like it better when they don't have to click the pic to see it.. |
|
|
|
Post by BEN on Nov 12, 2013 11:26:49 GMT -6
yeah I'm lazy to... but hey, whatever
|
|
|
|
Post by c2 on Nov 12, 2013 11:42:38 GMT -6
We will be cooking on this beast at the Xmas party!
|
|
|
|
Post by PARKER on Nov 12, 2013 12:08:21 GMT -6
So I'm guessing the grill turn 180* from the way it sits now is to wide to fit between fender well?
|
|
|
|
Post by Somebody on Nov 12, 2013 12:16:14 GMT -6
So I'm guessing the grill turn 180* from the way it sits now is to wide to fit between fender well? The way it sits is the way it will slide out... It has legs that fold up underneath that will hold it on the end.. You cook from the side.. We have other attachments that will work well with this position but you'll have to wait to see those.. |
|
|
|
Post by Somebody on Nov 12, 2013 12:23:40 GMT -6
We will be cooking on this beast at the Xmas party! How awesome would that be?? |
|
|
|
Post by Somebody on Nov 12, 2013 12:25:51 GMT -6
We need 8' of 4" angle iron.. funds are running low so we need you guys to help please.. 
|
|
|
|
Post by Yayger on Nov 12, 2013 12:27:07 GMT -6
Charlie... The port on the side appears to be a commercial fill port that is used when a company comes and fills say fork lift tanks on site
|
|
|
|
Post by Somebody on Nov 12, 2013 12:29:59 GMT -6
Charlie... The port on the side appears to be a commercial fill port that is used when a company comes and fills say fork lift tanks on site So Airgas or any of those places should be able to fill it if I take to them then?? The last place I took it to tried to fill it with the valve like a normal tank... it wouldn't fill and he said the valve was bad.. |
|
|
|
Post by BEN on Nov 12, 2013 12:30:53 GMT -6
We need 8' of 4" angle iron.. funds are running low so we need you guys to help please.. how much is it? Call Southern Steel and tell them whats going on... see if they'll give you a good deal on 2 4' pieces... lol |
|
|
|
Post by Yayger on Nov 12, 2013 12:35:00 GMT -6
Charlie... The port on the side appears to be a commercial fill port that is used when a company comes and fills say fork lift tanks on site So Airgas or any of those places should be able to fill it if I take to them then?? The last place I took it to tried to fill it with the valve like a normal tank... it wouldn't fill and he said the valve was bad.. all I know is that when I felt with forklifts the people that came out had a fast fill line that attached to a port like this and they open the regular nozzle to release pressure and fills in about 10 seconds Just call and ask some actual propane places instead of your regular fly by night places |
|
|
|
Post by mike on Nov 12, 2013 16:49:16 GMT -6
We need 8' of 4" angle iron.. funds are running low so we need you guys to help please.. I got angle iron and i'll be over with it and some other stuff shortly |
|
|
|
Post by BEN on Nov 12, 2013 17:41:13 GMT -6
sweet.. I knew Mike had to have something over there lol
|
|
|
|
Post by Daniel on Nov 12, 2013 21:44:45 GMT -6
Mike has everything lol .
|
|
Not bad for a rattle canned job.. 
Just remember...we give them back in 10 months 
It's alive!! 
