|
Post by coony278 on Aug 7, 2013 17:49:34 GMT -6
GL hope you get it going !
|
|
Rottenbelly
Full Member
Posts: 315
Location: Cedar City, Utah
|
Post by Rottenbelly on Aug 12, 2013 14:49:26 GMT -6
Alright, got the box back in for the fifth time. SUCCESS!!!! I did learn a little trick that worked ok for a bit. I used some small water balloons to slip over the fittings and hold the fluid in the lines. HINT.., double them up, the fluid does break them down but it does it slowly. Also wrap some rubber bands around them to keep them tight. It helped keep some fluid in the lines so bleeding them wasn't as bad. All mounted up and steering is one finger easy. I put the wheel against the curb when I parked at home and it will push the whole jeep over away from curb. I know it need to straighten that wiring up now that I'm done, its on my list.
|
|
|
Post by c2 on Aug 12, 2013 15:26:33 GMT -6
|
|
|
Post by Somebody on Aug 12, 2013 15:29:52 GMT -6
Fanfriggintastic!!
|
|
Rottenbelly
Full Member
Posts: 315
Location: Cedar City, Utah
|
Post by Rottenbelly on Aug 12, 2013 15:51:14 GMT -6
You ain't kidding!!! If it didn't work this time I was gonna empty my gun into it!!! Coming up next is a rubi case swap in!' Stay tuned.
|
|
|
Post by BEN on Aug 12, 2013 16:06:22 GMT -6
so how's it drive?!
|
|
Rottenbelly
Full Member
Posts: 315
Location: Cedar City, Utah
|
Post by Rottenbelly on Aug 12, 2013 16:20:05 GMT -6
Really didn't seem to change much. Made things smoother/easier. not as much bump steer, considering I haven't had a stabilizer for months. Didn't feel squirrelly or anything. Drove most of 51 on the way home with one finger!
|
|
|
Post by PARKER on Aug 12, 2013 17:53:44 GMT -6
|
|
|
Post by mike on Aug 12, 2013 19:37:20 GMT -6
glad you got it working
|
|
|
Post by coony278 on Aug 12, 2013 19:45:18 GMT -6
|
|
|
Post by N2DEEP on Aug 13, 2013 6:30:27 GMT -6
Finally! I keep reading this thread looking for some good news. Glad you got it behind you.
|
|
atx780
Junior Member
SRRS
Posts: 65
|
Post by atx780 on Aug 13, 2013 8:26:54 GMT -6
You'll enjoy it, I know I did on my old JK... and I had the very same system.
|
|