Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 22, 2013 17:49:32 GMT -6
Where should I, well we all know Bob is going to do the work, mount my hi lift? It can't go on the hood because I'm short and would beat the crap out of my hood before I managed to get it done. Unfortunately, I do not have that awesome bumper/tire carrier combo that allows for space for it in between. So does anyone have a super creative short person friendly idea?  ? |
|
Rottenbelly
Full Member
Posts: 315
Location: Cedar City, Utah
|
Post by Rottenbelly on Apr 22, 2013 19:07:04 GMT -6
I used 2 muffler clamps on the roll bar. About 6-7 bucks. you could put it low across the back.  |
|
|
|
Post by davidsyj on Apr 22, 2013 19:11:25 GMT -6
I used 2 muffler clamps on the roll bar. About 6-7 bucks. you could put it low across the back. Nice, are those the U-clamps? And I guess you just went around the padding and all that? |
|
|
|
Post by Somebody on Apr 22, 2013 19:16:40 GMT -6
I've seen people mount them to the grill hoops... So you need one of those first..  |
|
Rottenbelly
Full Member
Posts: 315
Location: Cedar City, Utah
|
Post by Rottenbelly on Apr 22, 2013 19:24:04 GMT -6
I used 2 muffler clamps on the roll bar. About 6-7 bucks. you could put it low across the back. Yep Nice, are those the U-clamps? And I guess you just went around the padding and all that? Yes, I measured my roll bar width. Got the clamps. Clamped them on the bar and pinched thru some wiring. Fixed the wiring so it runs over the clamp. Lined them up to some open holes on the jack and got some wing nuts from the hardware store to tighten the jack down to the clamps. Can get some better pics in the daylight tomorrow. |
|
|
|
Post by davidsyj on Apr 22, 2013 19:26:01 GMT -6
I've seen people mount them to the grill hoops... So you need one of those first.. Assface. I'm getting a grill hoop on the YJ before the LJ gets one.  |
|
|
|
Post by davidsyj on Apr 22, 2013 19:27:27 GMT -6
Nice, are those the U-clamps? And I guess you just went around the padding and all that? Yes, I measured my roll bar width. Got the clamps. Clamped them on the bar and pinched thru some wiring. Fixed the wiring so it runs over the clamp. Lined them up to some open holes on the jack and got some wing nuts from the hardware store to tighten the jack down to the clamps. Can get some better pics in the daylight tomorrow. This is the idea we were looking for. I can get this done in a matter of a few minutes tomorrow. No need for more pics unless you just really feel like taking them. Thanks for the idea  |
|
Rottenbelly
Full Member
Posts: 315
Location: Cedar City, Utah
|
Post by Rottenbelly on Apr 22, 2013 19:31:34 GMT -6
Yes, I measured my roll bar width. Got the clamps. Clamped them on the bar and pinched thru some wiring. Fixed the wiring so it runs over the clamp. Lined them up to some open holes on the jack and got some wing nuts from the hardware store to tighten the jack down to the clamps. Can get some better pics in the daylight tomorrow. This is the idea we were looking for. I can get this done in a matter of a few minutes tomorrow. No need for more pics unless you just really feel like taking them. Thanks for the idea Lol. Glad I could help. If you need any other shots of how I mounted them give me a shout. |
|
|
|
Post by davidsyj on Apr 22, 2013 19:39:50 GMT -6
This is the idea we were looking for. I can get this done in a matter of a few minutes tomorrow. No need for more pics unless you just really feel like taking them. Thanks for the idea Lol. Glad I could help. If you need any other shots of how I mounted them give me a shout. Will do. Thanks again man. |
|
|
|
Post by jeremy on Apr 22, 2013 20:12:13 GMT -6
I used 2 muffler clamps on the roll bar. About 6-7 bucks. you could put it low across the back. This is what I did  |
|
|
|
Post by mike on Apr 22, 2013 20:26:27 GMT -6
I will be moving mine behind my spare on the tire swing.... If i ever get the new to me bumper put on  |
|
|
|
Post by slinky on Apr 22, 2013 21:28:32 GMT -6
Julie's sets low inside the back of the tailgate over the hole (when she gets one) the mounts are there where the roll bar attaches to the tub. seems like a good place.
|
|
|
|
Post by dabbs1 on Apr 23, 2013 17:55:24 GMT -6
|
|
|
|
Post by BEN on Apr 23, 2013 18:48:01 GMT -6
so ya open the box up yet?
well, you're still at work...nevermind. lol
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 23, 2013 20:32:11 GMT -6
so ya open the box up yet? well, you're still at work...nevermind. lol On my way home now. This first 12 hour shift kicked my butt so the box probably won't even make it out of the car tonight. Thanks again! |
|
?
Just remember...we give them back in 10 months 
It's alive!! 
