|
|
JK tie rod
Nov 21, 2015 16:52:54 GMT -6
via mobile
Post by mike on Nov 21, 2015 16:52:54 GMT -6
And ends.
Anyone have one they want to sell ?
|
|
|
|
JK tie rod
Nov 21, 2015 19:23:51 GMT -6
via mobile
Post by BEN on Nov 21, 2015 19:23:51 GMT -6
Your drag links not factory
|
|
|
|
JK tie rod
Nov 21, 2015 20:15:06 GMT -6
via mobile
Post by c2 on Nov 21, 2015 20:15:06 GMT -6
What he said..  |
|
|
|
JK tie rod
Nov 21, 2015 20:23:31 GMT -6
via mobile
Post by BEN on Nov 21, 2015 20:23:31 GMT -6
|
|
|
|
Post by mike on Nov 21, 2015 21:11:24 GMT -6
Your drag links not factory Duh.....just trying to see if someone has a stock one laying around i can get to replace this fucked up nonstock one. I need the tierod and ends. I know none of it's stock |
|
|
|
Post by c2 on Nov 22, 2015 7:18:06 GMT -6
A stock one won't work because I did the flip on that knuckle.
I guess you could put the sleeve in from the bottom to make a stock one fit, but then it will be out of sync with the track bar.
|
|
|
|
Post by mike on Nov 22, 2015 7:31:35 GMT -6
They are mounted on the bottom now. Not flipped like normally done for high steer
|
|
|
|
Post by BEN on Nov 22, 2015 8:00:01 GMT -6
They are mounted on the bottom now. Not flipped like normally done for high steer You flipped the drag link? Tie rods on bottom but drag should be up top still. Let me check what I've got at work; may have a decent on laying in our scrap stuff. |
|
|
|
Post by mike on Nov 22, 2015 8:26:59 GMT -6
They are mounted on the bottom now. Not flipped like normally done for high steer You flipped the drag link? Tie rods on bottom but drag should be up top still. Let me check what I've got at work; may have a decent on laying in our scrap stuff. I didn't flip anything, they were on the bottom when I got it. |
|
|
|
Post by c2 on Nov 22, 2015 8:29:18 GMT -6
I'm confused....are you talking about the drag link or the tie rod? Tie rod was not flipped but the drag link was.
Did that end you picked up not work??
|
|
|
|
Post by BEN on Nov 22, 2015 8:31:52 GMT -6
It's set up like mine:  Drag link is on top and tie rods on bottom |
|
|
|
Post by mike on Nov 22, 2015 9:01:39 GMT -6
Ok yea the tierod sorry.
The tie rod end was loose in the tie rod and now the old end won't come out. Apparently it screwed the threads up.
|
|
|
|
Post by c2 on Nov 22, 2015 9:40:22 GMT -6
I think I have my stock one. I'll look when I get back in town
|
|
|
|
Post by mike on Nov 26, 2015 6:56:05 GMT -6
Got it back on the road. Thanks chris :bow:
|
|
|
|
Post by Weezul on Nov 26, 2015 9:20:08 GMT -6
It's set up like mine: Drag link is on top and tie rods on bottom If this is a current pic you might want to check the RCV boot. It looks like it has popped off... |
|
Just remember...we give them back in 10 months 
Aug 15, 2015 10:21:43 GMT -6
Just remember...we give them back in 10 months 
Aug 15, 2015 10:21:43 GMT -6
It's alive!! 
