|
|
Post by mike on Jul 5, 2015 21:22:48 GMT -6
|
|
|
|
Post by mike on Jul 5, 2015 21:26:33 GMT -6
I looked everywhere for a sheet of marine plywood to replace the one on it but found nothing locally so I came up with a plan. Cut two pieces 4' X 5' and join the two with a piece of 3/4" channel..... Well anyone looked for an aluminum 3/4" I-beam lately ? Well I have... with no luck. So I had another plan. If they don't sell one then i'll make one I found 3/4" channel and bought two of them, clamped them together, drilled holes and riveted them together every 6"s. And now I have an I-beam.  
  |
|
|
|
Post by mike on Jul 12, 2015 21:17:35 GMT -6
I made a little progress on the boat this weekend.I got all my new carpet, glue, deck bolts, rail risers and some other odds and ends I ordered. I got some of the decking on and the rest cut to fit and ready to install when I get the support beam done.   I got started on the beam that holds the transom. I got it bolted to the pontoons but still have some holes to drill in it for wires and cables to run thru.   |
|
|
|
Post by mpdxtreme on Feb 2, 2016 21:45:15 GMT -6
Summer isn't that far away. Any progress to report.
GG
|
|
|
|
Post by mike on Feb 3, 2016 7:55:36 GMT -6
|
|
|
|
Post by mpdxtreme on Feb 5, 2016 23:55:13 GMT -6
Yea, had a marital split and it was hers so it's sitting in pieces  I'll be looking for another one this summer  You too. I guess that sucks. Mines done and other the onetime cash outlay I got to keep the boat and toys. GG |
|
|
|
Post by mike on Feb 6, 2016 20:59:37 GMT -6
It was her dads and we inherited it when he passed.
|
|
Just remember...we give them back in 10 months 
It's alive!! 
